“I recently replaced my air conditioning system with a high SEER inverter system. Considering how much more advanced my new system is compared to the old one I wanted to protect my investment. Knowing my area is prone to lighting strikes and power irregularities I hired a licensed contractor to install the DTK-KG2 voltage monitor and surge protector on my system.

That same day, we had a typical afternoon storm for hurricane season, certainly not what I would consider a bad storm at all. However, there was a lightning strike in my neighborhood across the street from me. My Koolguard seen the voltage irregularity and or took the surge and protected my equipment. I went outside to see that the LEDs were flashing green indicating that the condition had returned to normal and power would be restored to my system shortly.

My system started up and has worked flawlessly in the weeks since. I could not have imagined being without heating or cooling and waiting for parts to come in on the first day of installation, had a circuit board or motor been damaged. The KG2 has been such a small investment for a large peace of mind, my family agrees. “  - James B.   Tampa Bay, Florida

Learn more about the DTK-KG2.

DITEK Corporation   ♦   Largo, FL

We are thrilled to announce the addition of the DTK-KG2 to our Kool Guard line of voltage monitoring devices. The new DTK-KG2 is specifically designed to protect HVAC equipment from harmful under-voltage and over-voltage events that can damage sensitive electronics and mechanical components within the system.

The DTK-KG2 is designed to be wired in series with a 120/240VAC or 120/208VAC split-base circuit up to 40 amps. A NEMA 4X polycarbonate enclosure enables the unit to function at high efficiency in harsh outdoor environments. The DTK-KG2 is designed to accept either half-inch or three-quarter-inch conduit and is intended to be placed directly between the safety disconnect or circuit-breaker and the equipment it is protecting. Also incorporating DITEK’s state-of-the-art surge protection design, the DTK-KG2 shields equipment from damaging transient voltage surges and spikes.

“A unique feature of this new product is that it does not require any calibration during installation,” said Mike Molinari, Director of Marketing for DITEK. “Whether it is being installed on a residence with a 120/240VAC service or a commercial building using a 120/208VAC service, it will automatically detect the input voltage and configuration.” The device monitors both phases individually with a line-to-ground voltage limit of 104VAC on the undervoltage and an overvoltage limit of 130VAC.

The DTK-KG2 is beneficial for applications that feature an inverter-driven AC system where too high of an input voltage could cause equipment damage. The DTK-KG2 keeps the power from reaching any devices unless it is within the specified range, and will cover power anomalies at a residence or business while also handling power surge events.

The key product features and applications for the DTK-KG2 include:

• Protection for under-voltage and over-voltage events
• Safely disconnects power to the system for 3 minutes allowing input voltage to return to normal range
• Diagnostic red and green LEDs indicate exactly what voltage condition is present
• Surge protection components included to divert harmful transient voltages away from the equipment
• Ductless AC Systems (mini splits)
• Inverter-type Compressor Systems
• Split Systems
• UL 60947-1 Listed
• UL 60947-5-1 Listed
• 10 Year Limited Warranty

For more information, please visit our product page.

July 19 - 21, 2021   ♦   Sands Convention Center   ♦   Las Vegas, NV

We are excited to showcase some of our new surge protection solutions featuring state-of-the art technology at ISC West 2021. DITEK surge protectors are your first line of defense against power surges and spikes caused by lightning or other sources. DITEK solutions protect critical electrical systems—from fire alarms to video surveillance—by safely diverting excess voltage to ground, avoiding costly repairs and downtime. DITEK’s vast array of solutions gives system designers, engineers, and installers peace of mind that equipment will remain safe from the damaging effects of power surges and spikes in voltage.

"Surge protection is the most vital and affordable way to safeguard critical electronic equipment and avoid downtime," said Jason Klein, National Sales Manager, DITEK. "Having a security or fire alarm system fail without warning is costly and dangerous. Our wide range of solutions ensure critical systems remain up and running at all times".

Total Surge Solution for Fire Alarm Systems – DITEK's DTK-120X12 combines protection for 120V system power with protection for up to 12 low voltage circuits, eliminating unnecessary damage caused by power surges and spikes. This unique and compact new combination simplifies implementation of comprehensive surge protection for fire alarm systems while providing remote monitoring of surge protection status using dry contacts. The convenient, modular plug-in design simplifies installation of surge protection modules and allows for easy replacement when needed. The combination of complete system protection along with high quality construction and field-replaceable modules makes this new offering a perfect fit for protecting fire alarm systems and control panels.

Expanded Versa-Module, Low Voltage Surge Protection – DITEK’s new modular surge protection solution provides tailored multi-voltage protection for all varieties of low-voltage electronic systems. The DTK-VM2 enclosures offer 4, 8, and 24 channel options that accept a wide array of rapid-replacement modules designed to protect any combination of signaling, data, and low voltage power circuits from 5V up to 130V. All of the enclosures in this series accept any combination of modules equipped with either RJ45 or screw terminal connections, and all feature single point grounding for simple and fast installation and service. This unique and compact new solution simplifies implementation of comprehensive surge protection for all kinds of critical electronic systems, including surveillance, access control, fire, fuel dispensing, point-of-sale, communications, industrial controls, audio, and more. The versatility of the new DTK-VM2 series enables installers to provide the ideal electrical surge protection for every part of a system.

UPS Products – DITEK's online, uninterruptible power supplies (UPS) offer reliable surge protection and double conversion technology that enables equipment to withstand the harshest power quality conditions, such as surges, spikes, brownouts and total power loss. This compact and economical UPS series is available in 1kVA - 3kVA models, and offers rack or tower configuration. They also feature USB and Ethernet interfaces as well as an intuitive LCD display. DITEK’s UPS products provide cost-effective and reliable performance for network servers, back office computers, point-of-sale devices, and similar mission-critical equipment.

Network Switches, Injectors and Extenders – In addition to DITEK's surge protection division, DITEK Networks supplies IT professionals and security integrators with advanced networking hardware— including PoE+ network switches, extenders, and injectors; as well as Gigabit PoE+ industrial network switches designed for harsh industrial environments. All switches are able to use existing network cables and feature Green Ethernet power saving technology that deactivates unused ports and adjusts power levels. This new line gives IT professionals and security integrators a new choice for cost-efficient, easy-to-install powered networks.

For more information, please visit us at booth# 8058 in Las Vegas, or visit online at www.diteksurgeprotection.com.

DITEK Corporation   ♦   Largo, FL

We are excited to announce the launch of a new modular surge protection solution that provides tailored multi-voltage protection for all varieties of low-voltage electronic systems. The new DTK-VM2 and DTK-VM2T Series product line offers 4, 8, and 24 channel enclosure options that accept a wide array of rapid-replacement modules designed to protect any combination of signaling, data, and low voltage power circuits from 5V up to 130V. All of the enclosures in this series accept modules equipped with either RJ45 or screw terminal connections, and all feature single point grounding for simple and fast installation and service. This unique and compact new solution simplifies implementation of comprehensive surge protection for all kinds of critical electronic systems, including surveillance, access control, fire, fuel dispensing, point-of-sale, communications, industrial controls, audio, and more.

“The new DITEK Versa-Module 2 Series is a breakthrough in compact, customizable surge protection,” said Mike Molinari, Director of Marketing, DITEK. “Now every installation that includes low voltage signaling, data, or power can be protected with a mix of modular devices that match the specific needs of that system – with a single point ground connection that makes installation a breeze.”

The DTK-VM2W4 and DTK-VM2W8 enclosures are designed to be wall mounted, and accommodate up to 4 and 8 VM2/VM2T protection modules, respectively. The DTK-VM2R24 is designed to be rack-mounted, and accepts up to 24 VM2/VM2T protection modules. As an additional flexibility benefit, all the enclosures come with a supply of blank cover plates, and are compatible with the popular DTK-NETMS and DTK-EXTMS Ethernet, PoE and PoE Extender protection modules.

Versa-Module 2 protection modules are available in two types, with DTK-VM2 modules featuring RJ45 connections, and DTK-VM2T modules featuring screw terminal connections. Both types can be mixed in a single housing. Protection modules are available in a wide range of voltages to cover the needs of any low-voltage system, including 5V, 12V, 24V, 36V, 48V, 75V, and 130V service voltages. Versa-Module 2 protection modules feature a hybrid design utilizing both SAD and GDT technologies for high-performance protection. Any combination of protection modules can be mixed in a single housing, allowing system installers to provide appropriate electrical surge protection for every part of a system. All of the protection modules are easily field-replaceable, allowing for quick restoration of protection when needed.

DITEK Versa-Module products are made in the USA, with a 10-year limited warranty.

For more information, please visit our product page.

DITEK Corporation   ♦   Largo, FL

We are pleased to announce the promotion of Wendy Gattis to Chief Executive Officer.

“Over the past 17 years Wendy has gained experience at all levels of the company and is well prepared to lead DITEK into its next era of success,” says Robert McIntyre, Founder of DITEK Corporation. “We are thrilled to see her take on this important role.” 

Ms. Gattis joined DITEK Corporation in 2003 as the Director of Marketing Services, leveraging her experience in electronic component sales and supply chain solutions. Over the next 13 years she continued her ascension through the company, serving as Controller and Chief Financial Officer. In 2016, Ms. Gattis became DITEK’s Chief Operating Officer, continuing to build her leadership expertise and managing the day-to-day operations of the business.

“This company has been, and continues to be, a fantastic place to build my career and the best possible professional home,” said Ms. Gattis. “I look forward to continuing the DITEK legacy of producing high-quality surge protection, UPS, and networking devices that exceed customer requirements and expectations.”

For more information, please contact us at 800-753-2345 or visit online at www.diteksurgeprotection.com.