Rack Mount AC Power Surge Protector The 1U, rack mount DTK-RM12AC is a perfect solution for todays rack-mounted servers, call systems and CCTV equipment. It provides twelve surge protected AC outlets, with six on the front for convenience.
8 Outlet 120VAC Surge Protective Device Protect AC power and telco/fax lines with DITEK's DTK-8FF eight outlet plug-in surge protector. Accepts up to six transformers at the same time.
7 Outlet Surge Protective Device with Load Sensing Technology DITEK's DTK-7VS is a seven outlet power strip with load sensing technology, and illuminated load-status indicators for each level of load status. 120VAC - 15A Illuminated load-status indicator - different colors for each level of load status 2-in-1 power ON/OFF rocker switch UL1449 Listed Type 3 SPD
Single Outlet 120VAC Surge Protective Device DITEK's DTK-1F is a single outlet surge protector that provides AC power protection for alarm panel transformers and point of use appliances. Single AC outlet protects critical equipment Center screw secures to outlet and can also secure a connected transformer Diagnostic LED indicates AC power and SPD function UL1449 Listed Type 3 SPD
120VAC Line Conditioner with Surge Protection DITEK's DTK-LC2 sets a new standard for 120VAC power filtering. Its unique design combines UL1283 noise filtering to ensure clean power to connected equipment, with maximum critical load protection to minimize AC supply voltage spikes and isolate incoming surges that originate from lightning or other sources. Provides UL1283 EMI/RFI noise filtering to ensure clean power to connected equipment Protects 120VAC single phase critical loads LED health status indicator for power, ground and protection status Audible alarm sounds when protection is compromised Ethernet/PoE surge protection module built-in
DIN Rail Surge Protective Device The DTK-DR Series of DIN Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments. The DTK-DR480P2 protects 240/480VAC split phase panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels Approved for UL508 control panels
DIN Rail Surge Protective Device The DTK-DR Series of DIN Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments. The DTK-DR480P3 protects 480VAC three phase delta panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels Approved for UL508 control panels
DIN Rail Surge Protective Device The DTK-DR Series of DIN Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments. The DTK-DR480P4 protects 277/480VAC three phase wye panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels Approved for UL508 control panels
DIN Rail Surge Protective Device The DTK-DR Series of DIN-Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments. The DTK-DR480P4N protects 277/480VAC three phase wye panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels This model offers neutral to ground (N-G) protection Approved for UL508 control panels
DIN Rail Surge Protective Device The DTK-DR Series of DIN Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments. The DTK-DR600P4 protects 347/600VAC three phase wye panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels Approved for UL508 control panels