April 2023

DTK-DR120P1

2023-09-27T17:24:41-05:00April 13, 2023|

DIN Rail Surge Protective Device The DTK-DR Series of DIN Rail surge protectors are designed to provide point-of-use protection for machine control panels and similar applications in commercial and industrial environments.  The DTK-DR120P1 protects 120VAC single phase panels. Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection Compact, modular design for easy integration within machine control panels Approved for UL508 control panels

Read More

DTK-DF120S12

2023-08-17T14:02:02-05:00April 13, 2023|

Twelve Circuit Series Connected Surge Protective Device with Dry Contacts and Audible Alarm The DTK-DF120S12 was specifically designed to protect convenience stores and multi-pump fueling stations from unnecessary damage caused by electrical surge events. This unique new configuration delivers a wide range of benefits to store operators by protecting sensitive fuel pump control systems and more from damage while ensuring that protection is operating correctly. Visual, audible, smart. The Deflector's patented design provides maximum critical load protection by minimizing AC supply voltage spikes and isolating incoming surges that originate from lightning or other sources. Protects up to twelve 120VAC single [...]

Read More

DTK-DF120S1

2024-10-24T08:34:51-05:00April 13, 2023|

Series Connected Surge Protector with Dry Contacts and Audible Alarm Visual, audible, smart. DITEK's Deflector DTK-DF120S1 sets a new standard for 120VAC Power protection. Its patented design provides maximum critical load protection by minimizing AC supply voltage spikes and isolating incoming surges that originate from lightning or other sources. Audible alarm sounds when protection is compromised or protection module is removed Separate LED indicators for power, ground and protection status Rapid-Replacement modules for ease of installation (DTK-DF120M) Dry contacts for remote notification when service is required UL1449 Listed Type 2 SPD UL1283 EMI/RFI noise filtering ensures clean power to connected [...]

Read More

DTK-DF120M

2023-09-27T17:32:21-05:00April 13, 2023|

Deflector Series Replacement Surge Protection Module The DTK-DF120M Deflector Series Rapid-Replacement surge protection module provides a new level of protection for 120VAC critical load circuits. The DTK-DF120M features an LED health status indicator that flashes and sounds an audible alarm on the modules’ wall mountable base when protection has been compromised.  Its patented Rapid-Replacement design offers quick and easy installation with no additional wiring required. Simply remove the compromised module from its base and replace it with a new one in seconds! Audible alarm sounds when protection is compromised or protection module is removed Separate LED indicators for power, ground [...]

Read More

D50-4803D

2025-01-23T10:05:47-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-4803D protects 480VAC three phase delta panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More

D50-347/6003Y

2025-01-23T10:06:03-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-347/6003Y protects 347/600VAC three phase wye panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More

D50-277/4803Y

2025-01-23T10:06:22-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-277/4803Y protects 277/480VAC three phase wye panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More

D50-2403DFM

2023-10-18T07:33:16-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-240HW protects 240VAC single phase panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More

D50-2403D

2025-01-23T10:06:43-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-2403D protects 240VAC three phase delta panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More

D50-2401

2025-01-23T10:07:00-05:00April 12, 2023|

Industrial Surge Protective Device - 50kA/Phase DITEK's D50 industrial AC power surge protection devices are recommended for electrical panels rated at 200A or less. The D50-2401 protects 240VAC single phase panels. 50,000 Amp surge current rating ensures long service life Compact size enables close mounting to protected panel, minimizing wire length and maximizing performance Diagnostic LED indicates system power and SPD function

Read More
Go to Top