April 2023

DTK-120/240HW

2024-05-14T11:47:07-05:00April 13, 2023|

120/240VAC Split Phase Surge Protective Device DITEK's DTK-120/240HW offers compact, parallel mount surge protection for electrical panels and dedicated branch circuit loads. Diagnostic LED indicates ground system power and SPD function Approved for 20A circuit breakers NEMA 4X weatherproof enclosure UL1449 Listed SPD Type 1

DTK-ESS

2024-07-19T10:44:29-05:00April 13, 2023|

Electric Door Strike Surge Protector DITEK's DTK-ESS electric door strike (magnetic locks) surge protectors are designed to be installed into door frames and access control panels. Parallel installations does not impede operation of mag locks Compact design fits into door frames and access control panels Sold in pairs to protect both ends of the lock circuit

DTK-2MHLPTM

2023-04-26T00:00:49-05:00April 11, 2023|

DTK-2MHLP Series Test Module DITEK's easy to use DTK-2MHLPTM test module aids in testing all 2MHLP and 2MHTP circuits. Simply replace the suspect module with our test module for instant confirmation.

DTK-3MB

2023-04-26T00:09:19-05:00April 11, 2023|

Snap-Track Type Mounting Base Series Three module, 6 pair, hard wired mounting base for the DTK-2MHLP Series.  Allows the installer to protect multiple circuits while utilzing a common ground point.

DTK-4MB

2023-04-26T00:10:08-05:00April 11, 2023|

Snap-Track Type Mounting Base Four module, 8 pair, hard wired mounting base for the DTK-2MHLP Series.  Allows the installer to protect multiple circuits while utilzing a common ground point.

DTK-5MB

2023-04-26T00:10:41-05:00April 11, 2023|

Snap-Track Type Mounting Base Five module, 10 pair, hard wired mounting base for the DTK-2MHLP Series.  Allows the installer to protect multiple circuits while utilzing a common ground point.

DTK-MB10

2023-04-26T00:11:24-05:00April 11, 2023|

Snap-Track Type Mounting Base Single module, 2 pair, hard wired mounting base for the DTK-2MHLP Series.  Allows the installer to protect multiple circuits while utilzing a common ground point.

DTK-2MHLP24FWB

2023-09-27T17:14:54-05:00April 11, 2023|

Data & Signaling Circuit Modular Surge Protector with Snap-Track Base The DTK-2MHLP24FWB provides surge protection with exclusive load removal technology for two 24V circuits. Protects two 24V pairs per module Multi-stage SAD technology provides the best possible protection Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground

DTK-2MHLP24F

2023-08-21T11:06:35-05:00April 11, 2023|

Data & Signaling Circuit Surge Protection Module The DTK-2MHLP24F provides surge protection with exclusive load removal technology for two 24V circuits. With required snap-track bases, protect up to 10 pairs with a common ground. Protects two 24V pairs per module Multi-stage SAD technology provides the best possible protection Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground

DTK-2MHLP24BWB

2023-10-30T12:29:14-05:00April 11, 2023|

Data & Signaling Circuit Surge Protector with Snap-Track Base The DTK-2MHLP24BWB provides surge protection for two 24V circuits in a field-replaceable module. Includes hardwired mounting base for easy installation. Protect two 24V pairs per module Multi-stage SAD technology provides the best possible protection Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground NOTE: For 2MHLPB Series data sheet, use “DATA SHEET” below. For 2MHLPF Series data sheet, use “DATA SHEET 2” below.

Go to Top