April 2023

DTK-MRJPOEX

2026-10-05T09:00:34-05:00April 14, 2023|

Power over Ethernet Surge Protector for Outdoor Applications DITEK's single channel DTK-MRJPOEX is designed specifically for PoE connections exposed to extreme weather conditions. The NEMA 4X enclosure with liquid-tight cordgrips provide a watertight connection when installed in harsh/outdoor environments. Uses TVS diode and GDT technologies for superior protection Data speeds up to 10GbE without signal degradation NEMA 4X enclosure for outdoor applications PoE Plus, HiPoE ready for high-wattage applications

Read More

DTK-MRJPOES

2026-10-05T08:59:44-05:00April 14, 2023|

Power over Ethernet Surge Protector DITEK's single channel DTK-MRJPOES is designed with state-of-the-art circuitry to provide superior protection for Shielded 10GbE Power over Ethernet connections. This point of use surge protector can be installed at the equipment end, or ahead of injectors and midspan devices. When used with STP cable, the DTK-MRJPOES does not require a separate earth ground. For a complete solution pair with our rack and wall mount Network Series products for head end protection. Uses TVS diode and GDT technologies for superior protection Data speeds up to 10GbE without signal degradation PoE Plus, HiPoE ready for high-wattage [...]

Read More

DTK-MRJPOE

2026-10-05T08:59:56-05:00April 14, 2023|

Power over Ethernet Surge Protector DITEK's single channel DTK-MRJPOE is a 10GbE PoE surge protector that is PoE Plus and High PoE ready. This point of use surge protector can be installed at the equipment end, or ahead of injectors and midspan devices.  Its multi-stage, hybrid design provides superior protection for PoE applications. Uses TVS diode and GDT technologies for superior protection Data speeds up to 10GbE without signal degradation PoE Plus, HiPoE ready for high-wattage applications

Read More

DTK-MRJEXTS

2026-10-05T09:00:07-05:00April 14, 2023|

Ethernet Surge Protector DITEK's Single channel DTK-MRJETHS provides IP surge protection for shielded CAT5e, CAT6 and CAT6A data lines to vital business equipment such as data networks, POS terminals, ATMs and IP video cameras.. Protects all four shielded data pairs Data speeds up to 10GbE without signal degradation Uses TVS diode and GDT technologies for optimal circuit protection

Read More

DTK-PVPIPS

2026-10-05T08:37:02-05:00April 13, 2023|

IP/PoE Data and 12/24V Power Surge Protector The DTK-PVPIPS is designed to protect IP/PoE video cameras and systems from electrical surges and spikes on the network cabling and power supply lines. It complies with IEEE Std/ 802.3af and 802.3at for PoE, and offers shielded RJ45 connections with external grounding screw. Low-impedance video/data protection with full Gigabit Ethernet transmission speed Two pairs of power protection (12V/24V) rated at 6 Amps per pair to power camera, plus heaters, blowers, defrosters or PTZ motors Compatible with CAT5e, CAT6 and CAT6A cabling infrastructure

Read More

DTK-PVP56V

2026-10-05T08:37:21-05:00April 13, 2023|

PoE Data and 56V Power Surge Protector The DTK-PVP56V PoE surge protector is designed to protect PoE applications utilizing a copper/fiber composite cable infrastructure from electrical surges and spikes on the network cabling and power supply lines.  It complies with IEEE Std. 802.3af and 802.3at for PoE, and offers shielded RJ45 connections with external grounding screw. Low-impedance video/data protection with full Gigabit Ethernet transmission speed Two pairs of power protection (56V) rated at 6 Amps per pair to power camera, plus heaters, blowers, defrosters or PTZ motors PoE Plus, HiPoE ready for high-wattage applications

Read More

DTK-NETMS

2023-05-03T03:52:45-05:00April 13, 2023|

Rapid-Replacement Surge Protection Module Ethernet and PoE protection module for DITEK's NETS and EXTS rack and wall mount devices.  Mix and match rapid-replacement modules to protect Ethernet, PoE and PoE Extender circuites within the same rack or wall mount housing. Uses SAD and GDT technologies for superior protection Robust 20kA per pair surge current rating Data speeds up to 10GbE without signal degradation

Read More

DTK-WM8NETS

2026-10-05T08:58:17-05:00April 13, 2023|

Wall Mount 8 Channel Network Surge Protector The DTK-WM8NETS is an 8-channel, wall mount surge protector that uses state-of-the-art circuitry to provide best-in-breed surge protection for shielded Ethernet, PoE and optional PoE extender circuits. It supports data speeds up to 10GbE, and provides surge protection grounding to remote devices when used with STP cabling. The DTK-WM8NETS is ideal for smaller installations where Ethernet cabling feeds require protection before entering network switches. Also available with 4-Channels! Uses TVS diode and GDT technologies to provide optimal protection for shielded Ethernet, PoE, PoES and PoE extender circuits Rapid-replacement modular design allows modules to be [...]

Read More

DTK-WM8EXTS

2026-10-05T08:58:43-05:00April 13, 2023|

Wall Mount 8 Channel PoE Extender Surge Protector The DTK-WM8EXTS is an 8-channel, wall mount surge protector that uses state-of-the-art circuitry to provide best-in-breed surge protection for PoE extender circuits. It supports data speeds up to 10GbE, and provides surge protection grounding to remote devices when used with STP cabling. The DTK-WM8EXTS is ideal for smaller installations where Ethernet cabling feeds require protection before entering network switches. Uses TVS diode and GDT technologies to provide optimal protection for PoE extender circuits Rapid-replacement modular design allows modules to be swapped from front of device without removing from rack Robust 20kA per [...]

Read More

DTK-WM4NETS

2026-10-05T08:59:05-05:00April 13, 2023|

Wall Mount 4 Channel Network Surge Protector The DTK-WM4NETS is a 4-channel, wall mount surge protector that uses state-of-the-art circuitry to provide best-in-breed surge protection for shielded Ethernet, PoE and optional PoE extender circuits. It supports data speeds up to 10GbE, and provides surge protection grounding to remote devices when used with STP cabling. The DTK-WM4NETS is ideal for smaller installations where Ethernet cabling feeds require protection before entering network switches. Also available with 8-Channels! Uses TVS diode and GDT technologies to provide optimal protection for shielded Ethernet, PoE, PoES and PoE extender circuits Rapid-replacement modular design allows modules to be [...]

Read More
Go to Top